No Responsibility is taken for member-to-member transactions. The sharing of personal details should be taken off-line and NOT publicly posted for your own safety.
POPY 1/144 PROJEKT FLIEGER 02 Messerschmitte Me262 HGⅢ Jet Fighter SET 3pcs JV44
$99
PLATZ 1/144 AREA 88 Shin Kazama F-8 Crusader w/Flames Unicon Decal LIMITED KIT
$120...
Last post
If only understood that rare doesn't necessary translate to well worth getting hold off . Mikro144 (definitely not to be confused with Mikro Mir) issued some of the worst kits ever (check out the Spitfire and Hurricane ). In fact, having seen what you get, I'd actually rate kits...
I've been meaning to pose these questions for a while. Have you ever requested parts from a kit manufacturer because they were either missing, broken, deformed or ... mumble, mumble ... you stuffed them up during construction? And, if so, how did you find the response?...
Last post
An update on the JACH situation. Emailed Jarda, the man behind the company, and he dispatched replacements which arrived in the post today. Cost just $AUS3.00 - definitely well worth it. :D
I have the following MiGs and F-8s from the recent F-Toys VS13 for sale. With the exception of the DF-8, each kit comes with decals for two marking options, and none of the markings are factory applied like earlier F-toys releases!
Hello everyone,
I have a, not so cunning, plan to build a small static rail layout in N Scale/1:144 scale. The problem is that N scale railway locomotives are exorbitantly expensive and so I would like to build my own. I have some plans but 2D images don't show the full picture,...
Last post
Thanks Smeg, the wishlist there is mostly just to remind me that certain kits/subjects exists in 144th as at some point I may want to make them. I'm in no rush to get to an IL-2 (surely there will be a new plastic tooling sooner or later) or J7W, particularly not when I've seen...
Mike, that so reminds me of the Goodies' advert for Plastic Spacemen breakfast cereal, where the little lad proudly proclaims Mum, Mum, I've found a corn flake! I'd post a link to the YouTube clip but the Beeb has had it pulled on copyright grounds. RIP, Tim Brooke-Taylor.
I purchased an F-Toys Fw190A-4 off Ebay.
Seller said decals were missing when he sold it to me I said OK I could source some aftermarket decals.
Anyway, kit arrived and the canopy is missing. The plastic parts tray inside the box was sealed with the original tape - pretty sure...
Last post
Thank you ID19!
I have the Platz boxing with the two canopy options :D
Got new stuff from Victrix today including the German infantry set. Since I don't wargame I don't need them - only getting them for the 81mm mortars for conversions I intend to do. So they are up for trade for 1/144 vehicles such as WTM, Cando, Panzer Korps, Victrix or...
I'm looking for the decals that came with Revell's EE/ BAC Lightning F.6 for an XI squardon Panavia Tornado F.3. Platz's decals for XI squadron are welcone too!!!!
Anyone got some spares who's willing to sell or swap?
Greetings Everyone,
I have the following 1/144th scale kits for sale. All are open but complete and unstarted. Prices are in USD, buyer pays actual shipping cost, and PayPal only please.
-Stransky Learjet 35 (Kit STR1403), comes with parts to build any of the Stransky Learjet...
I was lucky to find a F-Toys Tiger heli 8-)
I want to build it for my German Army Aviation collection, but it is the Australian version. I could of course repaint it ( and add/change some details), but it would be easier to have the German version. Also, somebody might want an...
Last post
Hi Fritz,
I can't help you with a PAH-2 myself... BUT I did find this:
I've ordered thru them several times. It might cost a bit more but I've had everything I ordered so far, delivered in good condition.
PM me if you have any questions (in German is fine too)
Hey Everyone. I recently picked up the Stransky Learjet, kit number STR1403. I’m after either the Phoenix Air markings (Kit STR1401) or the GFD markings (kit STR1404). If anyone has either of those and wants to swap for my decals or sell them, let me know.
Quick query. If someone has the F2A-1 Buffalo & B-239 Early Versions boxing of the Mark I kit, could you scan the instructions and post them here? I have the F2A-2 Buffalo & B-339B/D and I just want to check the optional parts allocation for the USN F2A-1. Many thanks in...
Last post
Brilliant, Tim. It is as I expected. The cowling (part 7), the prop (part 18) and the small profile spinner (part 13) are all specific to the F2A-1. These three are greyed out in the F2A-2/B-339 boxing. Part 17 is used for the land-based B-339D of the USAAC and B-339B of the...
Just written to Angus's observation regarding the canopy on the F-Toys' A-10 release and the whole vacform canopy thing reminded me that I have a couple of builds on hold because of canopy issues ...
The first is my Hungarian Ju87B (yes, Fabio, the one you sent me the One Shot...
Last post
Fake news? Whatever the case in the US, a certain person has left his mark on the English vocabulary! No, with that Stuka sitting forlornly on my Shelf of Shame, it is wishful thinking. Given that the most recent additions in the Eduard 1/144 range are rebadged Platz kits, maybe...
I am in need of a 3D Designer / Printer for Museum Project. I am looking for someone to create three Sikorsky Helicopters in 1/144th scale. I require them for a 1/144th scale hangar diorama.
I am looking to do a trade for a Revell 1:144 Eidechse Class, well the Bristol Sycamore actually, and wondered if anyone here can help? I have a fair few kits in various scales that I can trade.
'Landminenkehrmaschine' or land minesweeper. German. first of it's kind, back in the day.
Big tracks, small turret. Australian.
Snow- or mud plow. Used in the Falklands and Vietnam. Look at the size of that plow :shock:
If you like what you see it could...
Last post
Excellent work! Fritz, you were definitely quicker off the mark than me. Despite all my whinging about work, I did squeeze in a mini-session of cleaning up on the FT-17 shortly after it arrived Down Under, but you've made it to the finishing line whereas I've barely left the...
I wonder if anyone is building (or plans to build) one of the recent Mark1 Mirage III CJ (MKM14493 'Mach 2 Warrior') or RZ (MKM144102 'Worldwide Service') kits and would be prepared to part with the South African decal options in the box?
I will gladly buy or...
Last post
Sutch - thank you so much! That would be so great. Amazing
I’m not sure I do have any Egyptian or Syrian Decals but I’ll have a look. I do have that Beau/Gladiator box but it’s in storage 300km away. Let me have a rootle tonight and I’ll get back to you.
Users browsing this forum: No registered users and 20 guests
Forum permissions
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
»
»
