Most of these are available to non-Japanese buyers through HLJ, albeit in box form (I.E: even if one is interested in a single vehicle he has to buy the whole box including other models he might not be interested to have); marketing may vary in time (both box title and contents...
Last post
Not quite sure I need 7 Pershings at once, and it would certainly be a challenge embedding these light units into that resin. What is also interesting is just how many Fairy items are currently listed on Japanese Yahoo when you click on the links. Other than those from our own...
World War 2
A100 M3 General Lee (USA)
A105 M4A2 Sherman (USA)
A106 M4A3 Sherman (USA)
A107 M4A4 Sherman (USA)
A109 M4A3E8 Sherman (USA)
A110 M5A1 Stuart (USA)
A111 M24 Chaffee (USA)
A113 M10 Tank Destroyer (3-inch Gun Motor Carriage) (USA)
A116...
Last post
I E-mailed Jeff recently and asked about new stuff coming up and what I would like to see. Got the 250/ neu covered and the 7/2 flak was the reply to my short list. Looking forward to both.
What I started is not enough for me, but I added something more.
I actually have a good reason :D
A model maker friend gave me an airbrush and a small compressor to make me start painting the models properly.
And so I decided to try it and then this model came in handy :D :D
So,...
Got a couple things done. A Kamayia Panzerhaubitze 2000 and same company, an M1134 ATGM Stryker. I kind of felt like I didn't do a very good job on the PhZ2K. Paint went on too thick. Ah well... Only 57283478 more little tanks to do.
Last post
I think Mr. Hobby's B519 spray first.
Then using AV paint with a concentration like milk can make the paint thinner.
But I don't know if other brands of paint can be used like this.
Here is another 3D print.
The MKŠK stands for Small Command Staff Car.
The Zastava factory produced under licence Fiat Campagnola 1107. This is one of the modifications with hard top and radio devices in rear compartment.
The designs, excellent, for the 3D model were made by...
I don’t often model armor but had three reasons for attempting these two kits; (1) the Dragon kits look great in their box, (2) I wanted something small I could work on in a hotel room and (3) as window dressing for future vignettes.
However good they look in the boxes my...
Last post
I don't often model armour (sorry, armor)? You wouldn't know it. Two excellent completions. :D
In fact this wont to use for vignete with Mistel5 , but in meantime present here.
Nice kit with central part, wheels, lights in resin and lateral parts, windshield in photoetheched.
Scratched tent and construction, also made register plated from instructions for biggher scales...
Just for fun and because I can. WIP. rattle can chaos black primer with a home brew gunze mix of dark yellow lightened with a couple of lighter shades.
IMG_4565.JPG
Just mucking round with the airbrush.
Ian
Last post
Beautiful camouflage! This reminds me of Stug III in Finland.
The U-152 is actually the predecessor of the more famous and mass-produced ISU-152.
The main difference is that the SU-152 is built on the KV1 chassis, while the successor is developed on the basis of the IS2.
The model is a 3d print of the Chinese manufacturer 144TANK.
Like...
I've been gently packing up my man cave (sniff) in preparation for a house move, and I couldn't resist throwing this Brengun Clarcat together.
The Clarcat Type B deck tractor was adapted from an industrial tractor, and was used on aircraft carriers from the end of WW2 until...
Last post
I noticed that Brengun also released this in 1/72 and 1/48 scales, something they have done previously with several of their range. Thinking between the lines, could they perhaps look at those two larger scales and give us some more 1/144 scale goodies? Plenty to choose from ......
Good memories here. I had the early 1960's version of the diecast Y23 AEC bus that Matchbox reissued as a part of their . Sadly long gone. Definitely the next best thing here ... and 1/144 to boot! :mrgreen:
Hi, this is a result of four hands project with Leo-zd we started some time ago.
TAM 110 T7 B/BV is a general purpose off-road lorry made by Yugoslav (today Slovenian) vehicle manufacturer Tovarna avtomobilov Maribor (TAM). The four-wheel drive lorry is designed for transport of...
Before you read further, be aware that the following info refers to models that are actually 2mm:1 Foot, ie 1/152 scale. That said, I believe that they do complememnt N Gauge and 1/144's.
Having got myself the Revell C-17, I needed something to stick up its back end. I also...
Users browsing this forum: No registered users and 5 guests
Forum permissions
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
»
»
»
»
»
