Most of these are available to non-Japanese buyers through HLJ, albeit in box form (I.E: even if one is interested in a single vehicle he has to buy the whole box including other models he might not be interested to have); marketing may vary in time (both box title and contents...
Last post
Not quite sure I need 7 Pershings at once, and it would certainly be a challenge embedding these light units into that resin. What is also interesting is just how many Fairy items are currently listed on Japanese Yahoo when you click on the links. Other than those from our own...
World War 2
A100 M3 General Lee (USA)
A105 M4A2 Sherman (USA)
A106 M4A3 Sherman (USA)
A107 M4A4 Sherman (USA)
A109 M4A3E8 Sherman (USA)
A110 M5A1 Stuart (USA)
A111 M24 Chaffee (USA)
A113 M10 Tank Destroyer (3-inch Gun Motor Carriage) (USA)
A116...
Last post
I E-mailed Jeff recently and asked about new stuff coming up and what I would like to see. Got the 250/ neu covered and the 7/2 flak was the reply to my short list. Looking forward to both.
Original:
A specially modified vehicle are used to transport the US President by road. Since 1993 it has been a Cadillac (previously Lincoln). The model, which was used from 2009-2018, is not a modification of a single vehicle, but rather a compilation of several...
At last! M-36 was the heaviest-hitting US tank destroyer, much better able to deal with Tigers and Panthers without using special APCR ammo or having to maneuvre to get a side hit: It appeared late in 1944, in time to be used in the Battle of the Bulge.
rdn.png
After that,...
Last post
And even a hybrid T-55 lower hull and M18 turret saw the unholy light...
Nice additional history and research about the models btw...
Converting some Arrowhead 250/1s to 250/7s using the mortars from the Victrix German infantry set.
Last post
Nice little conversion. Knowing how well all your AFVs turn out, these will be little beauties when completed.
And a timely reminder that I DO have some Arrowhead thingies in the stash. Being time-poor for the current Group Builds, maybe a couple of 1942 quickies ? :idea:
Something in between:
Admittedly I have been inspired by the Faun L1212 from panzershop.nl Tim presented- I then remembered I had the Kässbohrer 25t deeploader already built and the Faun 912/45A tractor stored somewhere. As a load I chose something small, the Hotchkiss Spz kurz...
Last post
Stunningly good. Thought I'd clicked onto a 1/35 scale build site by mistake! :mrgreen:
This goliath, although in 144, is bigger than normal armored vehicles in 72, 600mm merzer that Wermaht used in siege of Sevastopol.
Styrene, Trumpeter, model. It is assembled without any problems, there is only a bit of hearth, the details are very nice. The model with the...
Last post
No doubt the same sentiments expressed by those in the firing line of that 60 cm cannon. A 2,170 kg shell tends to make a impact ... :lol:
This is the class pick of my 144 that finished the 2021 8-)
(for complete group here is missing one 1/350 - MAS15 and three 1/72 high speed tractor, CV-33 and polish tankete)
As I wrote in previous post nice looking externaly but the plastic is soft and only can be cut with razor.
Nor sanding or filling.
For gluing I used cyanoacrilate glue .
Painting with Dunkelgelbfrom Lifecolor.
Ehaust pipes and machinegun made from tubes.
Fortunatly the main gun...
Last post
Nice one in dunkelgelb. Not a boring result either
Another small. This time it is about the well-known Panzerkampfwagen III Ausf. III. Variant with 50mm cannon.
The model is a 3d resin print excellently made by 144TANK , ordered in white resin, a basic variant that has softer details.
Although the details are very nice and good,...
Last post
Thk.
It's more than one layer of flat cote.
Maybe on daylight on photos lose brightnes. In real they aren't bright.
And for both I added small parts od dust colour in flat clear, i use only brushes and that od the way to simulator light overspray of dust.
Another one, this time on monocrome scheme used by police forces.
Last post
Thk all.
I am verry satisfied with the final result, except painting, maybe one day I grow upp in painting ☺️.
In the meantime I am prepearing som other interesting pieces.
Maye soon I shall make a jump of category, just time 😎
Here is another 3D print.
The MKŠK stands for Small Command Staff Car.
The Zastava factory produced under licence Fiat Campagnola 1107. This is one of the modifications with hard top and radio devices in rear compartment.
The designs, excellent, for the 3D model were made by...
Last post
That:s a welcome addition to the small vehicle fraction indeed! And beautifully built and painted!
With the license plates I usually cheat a little and use some - more pr less accurate ones + from N-scale. :oops:
Suitable to these temperatures at the moment, I got a new Model, finished one month ago.
For everyone who doesn’t know what the Antarctic Snow Cruiser is, please click here:
I like to build exotic topic, like this Model. Even in 1/144 is the Snow Cruiser a big Model (120mm...
Last post
Very nicely done of a very interesting vehicle.
I have always found this vehicles size and design to be very futuristic which makes it all the more amazing that this thing was designed, built, and used in the late 1930's.
I had been wondering if any manufacturer had plans to release a kit of the new British Army Ajax 'tank' - I've looked at Shapeways to see if they had a printed version in 1/144 or other scale.
Ajax is of course the planned replacement for the CVR(T) family including the...
Does anyone have info on sources for german soldier models that are not in fighting stances? I am planning a diorama that would be enhanced by having a couple of guards, rifles shouldered, and others doing general work around the base.
cheers,
Mike
Last post
Yes I agree. I forgot that all gets added on at the checkout. Way too much.
Anti-aircraft missile designed to shoot down high and fast flying opponents.
I found good photos and great drawings online, alsu used instructions for this missile in 1/35 from Trumpeter. I made a 3d model and had it printed with a resin printer.
Last post
Thk! 😎
Not the last one 😁
It's neccesary to provide AA protection on diferent levels 💪
It has already been shown in part in the family theme, but as the mother of the others, here are a few more details.
Fortunately, you can find a lot of photos and profiles of this vehicle on the net, so it was so much easier to work with.
From the drawings I found and a couple...
Last post
It's very interesting, when you get some goals it's like making real model :)
Other resin model from Brengun.
As the previous, this is in nice resin with small number of bubles.
Nice details, crisp tracks, as usual for resin cast internal side of tracks (in on piece with wheels) is flat, as the botom of the hull.
I decided for desert sheme to distance...
Users browsing this forum: No registered users and 3 guests
Forum permissions
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
»
»
»
