Kampfgruppe144 BBS

Just found this over at Model Warships.com ...

Firstly a big thank you to Mark (mtcc75) for getting this for me.
I had the metal one from De Agostini and had started to detail it (good basic detail but I got PE torpedoes and guns from Griffon models).
Anyhow, the Triplenuts being 3D printed was always going to be easier to...

Due to various combinations of circumstances, I significantly slowed down my work on the models, the real ones, so the question is what and how much I will end up in group build.
But that's why I worked a lot in the virtual field and that's how another interesting 3D project was...

I normally model submarines (which are actually aircraft albeit moving through a thicker fluid than air) in the classic 'full hull on brass pegs on a block of wood' style.

I've always wanted to do 'water'....all that dramatic box-art....but looking at how much better others do...

I found this on ModernWarships.com . Revell's U.S.S. Saucy:

This guy has a serious addiction, some many carrier class 1/144 vessels...

putting Mike & David to shame.. ;)

Here's a little styrene, true with a few extras: D
LCM has no need to be represented, as I also have 72 I have to admit that sometimes I think that 144 is not downscaled from 72 but vice versa. Namely, the details are nice, the deck anti-skid ribs are a bit too big, but the rest...

Not one of my favorite subjects, but I picked up this bagged Trumpeter’s 1/144 scale LCM(3) kit with no box on e-Bay for less than ten bucks!

Not expecting much, I was actually quite impressed with the quality of this little molding. The weld seams on the interior bulkhead...

Finished Build

Build videos

Could be yours for around $16000 AUD ...+ shipping :-)

I have been meaning to get the flight deck vehicles, by Brengun, ever since I saw the build by Angus in his . Well, I have now decided to get those little beauties but what sort of base to display them on..............?

Has anyone built on yet?
David

I would like to do a launch scene onboard a Forrestal class carrier and would like to know if the Jet Blast Deflector (JBD) in Dragon's kit #4003 would be suitable. I don't know if the JBD sizes/design changed between the super-carriers, so not sure if that JBD was for a later...

Hello,

I would like to present my second vessel scratch built in 1:144. S-2Wilczur rescaled from a 1:50 paper model.

I made plug molds to termoform the hull and superstructure. Maybe some day I'll make the RAF rescue boat like this one:

Some parts I used are...

Hi,

This is the project I finished some time ago. It was a floating base of Polish Navy rescue divers in 1939.

ORP Nurek

Service entry: 1 listopada 1936
Length: 29 m
Width: 6 m
Immersion: 1,4 m

It was destroyed in first days of WWII by Stuka diving bomber which...

Accidentally came across , a French producer of resin and PE accessories for naval models in numerous scales, including 1/144. For anyone with the Revell Flower class Corvette, there's a couple of neat looking sets of parts, whilst anyone looking for an Oerlikon gun should look...

OK to be fair that's 1 x 1/144 and 2 x 1/150 but in the circumstances, 1/150 is near as damit!

I managed to get a 1/144 Mitsuwa PT PT 109

And two from Zhengdefu

The PLA Hela Missile boat (essentially an OSA)

and a Type 021 Missile Boat (improved OSA)

Got some wok...

Discussion on ships seems to have gone a tad quiet recently so I though I would add this.

Very colourful - although I have seen one in a plain grey colour. It has a reasonably detailed cockpit interior although I have been unable to find any official photos to confirm the...

Has anyone bought/built the Revell Flower class in 1/144 yet? I have the 1/72 model sitting in the no way will I ever get round to building this corner of the stash and have basically decided that if the 1/144 is any good whatsoever I will get rid of the 1/72 (almost certainly...

Not seen this mentioned before but came across it in stock at Hannants

At over £89.00 its too expensive for a 1/144 kit that I would have only limited interest in but it may be of interest to some of you.

Thomas at Tea and tank highlighted an interesting 1/44 vessel that is available as a bonus with a (Del Prado (or equivalent)) monthly issue of 1/1250 ships.
With some additional modeling to it and a lick of paint, it would probably turn out a nice looking boat!?

This got me...

With my eye on the impending Flower-class Corvette, I thought I'd give this a go.
Initial stages are all to do with building the hull and it's a very well-engineered piece of kittery, building into a solid model.
For starters, it's a goodly size;

Detail is of the usual high...

Recently found this model of the USS Thresher on sale at Hannants

At £108 it had better be REALLY good....

Also doing a USS Permit

at the same price. No previous experiance with Modelsvit. Anyone seen these.

Article here

Wouldn't mind at least one to go with the 1/144...